Choosing a case
PSA slab case, slab guard or both: what actually protects your slab?
4 min readUpdated on 2 November 2026

The slab protects your card, but the slab itself scratches, and its corners take the knocks when it's dropped. A guard takes those knocks on the edges and corners; to keep scratches off the window, you need a case.
A slab guard protects the edges and corners of your PSA slab; a PSA slab case protects the whole thing. If you want both, you'll need the case made for a slab with a guard, because a guarded slab won't fit the regular slab case.
- A slab guard is a coloured acrylic frame that clips around the slab, with a backplate. It takes the edges and corners, which is where slabs get damaged when they're dropped or slide across a table.
- A PSA slab case is a closed case of clear acrylic around the entire slab. It covers the big flat faces as well, and that's where scratches happen.
Want a splash of colour and mainly worried about corners? Go for a guard. If the slab lives on a shelf or travels with you to card shows, a case does more.
Everything here is about the standard PSA slab. We don't make guards or cases for CGC or BGS slabs.
| Slab guard | PSA Slab Case | Case for slab with guard | |
|---|---|---|---|
| What it is | coloured frame with backplate | closed case, clear acrylic | closed case, roomier |
| Protects | edges and corners | the whole slab | the slab with its guard |
| Inner size (w x d x h) | 81.3 x 6.4 x 136.5 mm | 81 x 8 x 137 mm | 86.8 x 12 x 142 mm |
| Outer size (w x d x h) | 86.59 x 10.1 x 141.55 mm | 97 x 24 x 153 mm | 94.8 x 28 x 150 mm |
What does a slab guard do?
A knock or a fall usually lands on a corner or an edge. It slips out of your hand and lands on a corner, or an edge scrapes the table as you pass it round. A guard sits right there: an acrylic frame that clips around the slab and takes those hits.
It hardly adds any bulk. On the outside a guard measures 86.59 x 10.1 x 141.55 mm, just a few millimetres wider and taller than the slab. The card stays fully visible and the frame gives it a colour. Some collectors pick a colour per card, others stick to one per set.
The front is left open, though. A guard is a frame, so if you want the face of the slab covered too, you need a case.

PSA Slab Guard with Backplate
€5.99In stock
Not sure it'll fit your slab? The Guard Chooser shows your own slab to scale inside the guard.
What does a PSA slab case do?
A slab case closes around the whole slab, with 8 mm of acrylic on the sides and at the front. Scratches on a slab's window mostly come from sliding and stacking: slab on slab, slab in a box, slab across a desk. In a case, the acrylic is the only thing that touches anything.
It stands upright on a shelf. The clear acrylic of the case blocks 96% of UV light.

PSA Slab Case
€9.99In stock
The catch is space. A bare slab is roughly 6.4 mm thick, a cased one 24 mm deep, so close to four times as much. A slab storage box holds far fewer that way. That's no problem for a slab on display, but it is for a box full of them.
Both: guard and case
You can have the colour of a guard and the cover of a closed case. Check the table first, though: a slab with a guard on is bigger on the outside, in all three dimensions, than the regular slab case is on the inside, so it won't go in.
That's what the PSA Slab Case for PSA Slab + Guard is for. It's 86.8 x 12 x 142 mm inside, just enough room for a slab with its guard on.


PSA Slab Case for PSA Slab + Guard
€10.99Sold out
The combination suits the slabs you like to show off, on a shelf or in a display cabinet.
PSA only
Our guard and both slab cases are made for the standard PSA slab. CGC and BGS slabs come in other sizes, and we don't have anything for them. You can measure a slab from another grading company and compare it with the inner sizes in the table, but don't count on it fitting.
Do you need a guard or a case?
If a slab lives in a storage box and you rarely take it out, neither is essential. The damage happens to slabs that get handled, passed around, carried about or stood up on a shelf, and those are the ones a guard or case is for.
Frequently asked questions
Do I really need a case for my PSA slab?
Not always. A slab in a storage box that you hardly touch is fine without one. One that you handle often, display or take with you is more likely to pick up scratches on the window and knocks on the corners. A case helps with the first; a guard or a case with the second.
Does a slab with a guard fit the regular PSA Slab Case?
No. A slab with a guard is bigger in all three dimensions than the inside of the regular case (see the table at the top). You'll want the PSA Slab Case for PSA Slab + Guard instead, which is 86.8 x 12 x 142 mm inside.
Does the slab guard fit CGC or BGS slabs?
No. The guard and our slab cases are made for the standard PSA slab, and CGC and BGS use different sizes.
My slab is already scratched. Does a case still help?
Plenty of collectors spot small scratches on slabs that have only just come back from grading. A case won't remove those, but it does stop new ones from sliding, stacking and handling.






